Support hotline：
+8620 81235505Company news
Current Position » Company news
Analysis of characteristics of aquarium cylinder top filter
Release time:[2019-7-8] Browse the number:5826
The pump that drives the cylinder top filter can be either a "dry" pump or a "diving" pump. So what are the characteristics of these two filters?
1. Cylinder top filter driven by a “dry” pump. The cylinder top filter is generally sold together with the filter box. The water pump is placed above the water surface, the water is pumped out and passed through the water tank. The filter material is placed in the water tank, and the water is opened under the water tank, and the filtered water flows back into the tank. The sink is equipped with a retractable bracket plate, which can be used to place equipment such as a heat rod. The inlet pipe is connected by a small pipe of about 20 cm in one section to achieve the purpose of lengthening, and the bottom is a mesh inlet, the motor part. Must be exposed to the outside of the water, not soaked in water.
The “dry” pumps on the market are generally sold in sets with cylinder top filters. Advantages: Safe and durable, energy-saving, independent filter combination, one section of the inlet pipe, easy to clean. Suitable for a variety of aquarium cylinders. Disadvantages: This filter has a small horsepower effect. ,
2. The cylinder top filter driven by the “dive” pump. As the name suggests, the pump is at the bottom of the water, plus an upper filter box or a container containing various filter materials and biochemical materials on the top. Advantages: safe and durable, power saving, low noise. Disadvantages: At the bottom of the cylinder, the outlet pipe that is sold is a spiral hose, which affects the appearance of the cylinder; the inner wall of the hose is dirty and difficult to clean. However, the hose can be replaced with a rigid tube and an elbow to form a right angle in the cylinder.
Some people think that "upper filtration" is a submersible pump plus an upper filter box. In fact, the "dive" pump and the "dry" pump combined with the filtering method composed of the filter material such as the upper filter box are called "upper filtration".
